TECHNICAL ARTICLES
ARB Lockers
The world’s most
highly regarded traction aid, an ARB Air Locker is a driver controlled
locking differential originally designed to give serious 4 wheelers the
traction needed to combat extreme off road terrain.
1984-1989 4Runner Bikini Top Installation
Instructions
1. Remove the factory hardtop
as per the instructions in your Factory Service Manual or Owners' Manual
(you can find them online as well).
Body Lift Installation Guide
This installation is on a 2000 4Runner using a 2" body lift with
additional accessories, but any body lift installation is similar.
Differential Stud Eliminator Kit Installation Instructions
No longer do you have to tap and drill the studs out and replace the
studs. Our new stud eliminator kit replaced the studs with Allen head
bolts that won't pull through like the stock studs.
Front Sway Bar Quick Disconnect Installation Instructions
1. After coating your OEM sway bar end links with some lubricant the
day/night before, remove both and save them as you might want to put them
back on if you ever decide to sell the vehicle.
Hydro Assist Installation Instructions
Before installing this
steering ram kit you will need to have your steering box tapped with #6
JIC fittings or purchase a steering box that has already been tapped.
Rear Lift Kit Installation Instructions
To begin
installation, raise truck using large secure jack stands. Remove rear
axle, drive shaft, shocks shackles, and leaf springs.
Rear Sway Bar End Link Installation Instructions
1. After coating your OEM sway bar end links with some lubricant the
day/night before, remove both and save them as you might want to put them
back on if you ever decide to sell the vehicle.
Ring & Pinion Break-In Procedure
All new 3rd members require a
break-in period to prevent damage from overheating.
Slider Installation Instructions
1. Using jack stands, place sliders at desired position on vehicle.
Center bars front to rear between wheel openings.
Solid Axle Swap Kit Installation Instructions
This kit is
designed to replace the IFS suspension on 1986-1995 Toyota Pickup's and
4Runners. Installation time is typically 2 to 3 days. In addition to
common hand tools, you will also need a plasma cutter or torch, grinder
and 230V welder.
Wheel Spacer Installation Instructions
Wheel Spacer Kit
Contents: 2 Aluminum Wheel Spacers 10-12 Lug Nuts (depending on
application) |
