3-Link
Aisin Manual Hubs
Armor
Bikini Top Kits
Body Lifts
Brakes
Bumpers
Clutches
Differentials
Front Axle
Front Lift Kit
IFS Lift Kits
Leaf Springs
Optima Battery Mounts
Quick Disconnects
Rear Axle
Rear Lift Kits
Rear Spring Hangers
SAS Kits
Shackles
Shock Hoops
Shocks
Sliders
Spring Hanger Kit
Steering
Transfer Case
Tube Doors
U-Bolt Flip Kits


1979-1995 4RUNNER/PICKUP BUMPERS

Front Tube Bumpers with Winch Mount
These front tube bumpers are built using our winch mounting plate (below) and feature a front 2" receiver. Mounting holes are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches. Bumpers mount to the factory holes on the front of 1984-1995 Toyota Pickups and 4Runners.

Front Tube Bumper, 1984-1985 4Runner or PickUp - $349

Front Tube Bumper, 1986-1988 PickUp or 1986-1989 4Runner - $349
Front Tube Bumper, 1989-1995 PickUp - $349
Front Tube Bumper, 1990-1995 4Runner - $349 

Due to the variance in shipping rates on bumpers depending on geography, please contact us for a shipping quote.

 

Rear Tube Bumpers
This rear bumper is one of the first in the industry that is constructed out of 100% DOM tubing, 1.75” OD X .120” wall thick, and shipped unpainted and lightly oiled to prevent rusting during shipping.

Rear Tube Bumper, 1984-1988 PickUp - $275

Rear Tube Bumper, 1984-1989 4Runner - $275

Rear Tube Bumper, 1989-1995 PickUp - $275

Rear Tube Bumper, 1990-1995 4Runner - $275

Due to the variance in shipping rates on bumpers depending on geography, please contact us for a shipping quote.

Rear Tube Bumper Braces - $39
This support welds to the bumper and can be welded or bolted to the frame for easy removal of the bumper. Not sold separately from a rear bumper order.

 

 

Front Bumper Winch Mount - $129 + $25 S/H


If your looking at building your own front bumper this mount makes a great starting point. This winch mount bolts on to the six factory holes found on 1984-1988 Pickups and 1984-1989 4unners. 1984-1985 body style requires drilling two additional holes in plate. Made from 1/4" plate steel. Two inch receiver tubing is also included. Plate is pre drilled for 5000-9500 low profile winches. Also includes holes for 9.0R Warn competition winch. Designed for use with steel or aluminum hawse fairlead. When building bumper, additional mounting points from bumper to frame are required if used for heavy winching. If using a winch with an integrated solenoid, such as the Warn 9500, trimming of the front plastic grill will be necessary. Unpainted finish.

Hawse Fairlead - $35 + $10 S/H


Polished aluminum hawse fairlead. Designed for use with synthetic winch rope. Mounting holes are 10" on center for standard 3/8" bolts, compatible with most 5,000-9,500lb winches. Ultra smooth guide surface (rounded on both sides) to prevent damage to rope.

Home
Compressors
Fabrication
Merchandise
Recovery
Rocklights
Slider Adapters
Ultimate Air Tanks
Wheel Spacers
Wheels & Tires


About Us
Blog
Contact Us
Customer Rigs
Dealer Info
Gift Certificates
Policies
Powder Coating
Projects
SE4RJ Forum
Tech Info
The Shop
Used Parts
Where's the Wabbit?

 


All content Copyright© 2008 WabFab Off-Road, LLC.  All products intended for off-road use only.  Prices and products subject to change without notice.
Disclaimer

hosted by www.markvanmeter.com