|
1979-1995
4RUNNER/PICKUP BRAKES
 Master
Cylinder - 1" Bore - $129 + $15 S/H
Makes a great replacement for older Pickup's and 4Runners with smaller
bore size. Fits 1979-1995 Pickups and 4Runners. Master Cylinder
features 1" piston and residual valves for both front and rear disc
brakes. Can be used with disc or drum brakes. Includes
reservoir.
 Front
Brake Calipers
These calipers are the larger V6 style found on 88-95 Pickups and
4Runners. Great replacement for worn our or leaking calipers.
Also makes a great upgrade on 79-85 solid front axles when used with
vented rotors listed below. Note wheel spacers may be needed to
clear calipers on some wheels. No core charge, outright purchase.
Includes installed premium Semi-Metallic pads.
Front V6 Loaded Brake Caliper, Right - $119 + $15 S/H
Front V6 Loaded Brake Caliper, Left - $119 + $15 S/H
Front 4cyl Loaded Brake Caliper, Right - $119 + $15 S/H
Front 4cyl Loaded Brake Caliper, Left - $119 + $15 S/H
 Front
Brake Pads
Premium Semi-Metallic asbestos free front replacement brake pads.
Set of 4 pads. Applications to fit Toyota's from 1979-2004.
Front Brake Pads, 79-88 - $16 + $5 S/H
Front Brake Pads, 89-95 - $20 + $5 S/H
Front Brake Pads, 95 1/2-04 - $16 + $5 S/H
 SFA Vented
Rotor - $39 each + $15 S/H
1986 and later pickups and 4Runner feature larger vented rotors from the
factory. Earlier 1979-1985 trucks used solid (non vented) rotors up front
along with smaller calipers. If your installing a solid front axle on an
86 and later rig you will want to install a set of these vented rotors
onto the axle. With these rotors you will be able use your existing larger
IFS calipers. Simply unbolt your existing rotors and replace them with
these vented rotors. Slight grinding of the rotors backing plate will be
needed. Then simply install the IFS calipers right on to the solid axle
using the factory bolts. These rotors can also be used on 85 and
older trucks to increase braking effectiveness. Fits 81-85 Solid axles
with 8 hole style rotors.
IFS Vented
Rotor - $39 each + $15 S/H
 Extended
Brake Lines
These steel braided
brake lines are 26" long and are DOT approved.
Specifications:
*size 3/16"
*operating pressure = 1750 psi
*burst pressure = 7000 psi
*bend radius = 2.0"
*fits 79-95 4Runner & Pickup
Brake Line Kit (2
front and 1 rear) - $69 + $15 S/H
Brake Line (1 front F-F) - $25 + $5 S/H
Brake line (1 rear M-F) - $25 + $5 S/H
 Brake Line and Clip Mount - $5
+ $2 S/H
 Replacement
Pedal Cover - $4.99 + $2 S/H
Factory replacement cover fits brake or clutch pedal on 1979-1995 Toyota
Pickup's and 4Runners.
 Factory
Toyota Brake Hardware
Caliper Hard Line, Left - $4.99 + $2 S/H
Caliper Hard Line, Right - $4.99 + $2 S/H
Caliper Bleeder - $5.52 + $2 S/H
Rubber Bleeder Cap - $1.69 + $0.50 S/H
Caliper Bolt - $1.73 +$0.50 S/H
Caliper Bolt Washer - $0.63 + $0.25 S/H
|
