1979-1995
4RUNNER/PICKUP
AISIN MANUAL HUBS
Toyota
Aisin SFA Manual Hubs, 1979-1985 - $250 pair + $15 S/H
Included in kit:
- (2) Completely refurbished Toyota Aisin manual SFA locking hubs (30
spline)
- (2) New cover gaskets - star
- (2) New hub gaskets - round
- (2) New dial face o-rings
- (12) New M6 bolts for dial face plate
- New powder coating with clear coat (covers-black, dials-red,
lettering-metal)
Toyota Aisin IFS Manual Hubs,
1986-1995 - $250 pair + $15 S/H
Used to convert your 1986-1995 4Runner/Pick Up from automatic locking hubs
or ADD hubs to manual locking hubs.
Included in kit:
- (2) Completely refurbished Toyota Aisin IFS manual locking hubs (27
spline)
- (2) New cover gaskets - star
- (2) New hub gaskets - round
- (2) New dial face o-rings
- (12) New OEM bolts for dial face plate
- New powder coating with clear coat (covers-black, dials-red,
lettering-metal)
- Additional products are necessary to covert from auto/ADD locking hubs
to manual locking hubs (see kits below)
The above Aisin manual hubs
are refurbished and not new. They have the normal signs of 20+ years
of aging which can include, but is not limited to, dents, scratches, and
other signs of normal wear. We do our best to find the nicest Aisin
manual hubs we can to refurbish for you our customers, but again, these
are refurbished and will show normal signs of wear and use.
Below is what your vehicle's
rims/hubs will look like after converting from those other brand
aftermarket hubs to some OEM Toyota Aisin manual hubs refurbished by
WabFab Off-Road.
This is Rick R's 1998 T100 SR5 4x4 Extra cab Auto.

Refurbish Your Aisin Manual
Hubs - $100 pair + $15 S/H
Ship us your fully functional Aisin manual hubs and we will:
- clean and degrease your entire manual hub
- reassemble and grease your hubs and check their function
- sandblast off any old powder coating or paint
- powder coat them OEM black and red
- ship them back to you via USPS Priority Mail within 3-5 business days
Along with:
- (2) New cover gaskets - star
- (2) New hub gaskets - round
- (2) New dial face o-rings
- (12) New OEM bolts for dial face plate
*This does not include
replacing or repairing any manual hubs that are broken or missing parts
(especially the springs and ball bearings) when they arrive, as repairing
broken hubs with additional parts will cost extra.
Powder
Coat
Aisin Manual Hub Dials and
Faces - $35 + $15 S/H
Ship us your Aisin manual hub dial and faces (remove the hub dial
o-ring, spring and ball bearing) via USPS Priority Mail with insurance to
our address on the Contact Us page and we
will:
- clean and degrease
- sandblast off any old powder coating or paint
- powder coat them OEM black and red
- ship them back to you via USPS Priority Mail
Powder
Coat
Aisin Manual Hub Dials and
Faces Plus New Hub O-Rings, Gaskets and Bolts - $55 + $15 S/H
Same as above but in addition to your dials and faces being powder
coated we will include:
- (2) New cover gaskets - star
- (2) New hub gaskets - round
- (2) New dial face o-rings
- (12) New OEM bolts for dial face plate
Auto
Hubs to Aisin
Manual Hubs Conversion Kit Option 1 - $30 + $15 S/H
Used to convert your 1986-1995 4Runner/Pick Up from automatic locking
hubs (which do not stay locked in reverse) to manual locking hubs.
Included in kit:
- (2) 54mm lock nuts
- (2) Lock washers
- (2) 54mm adjusting nuts
- (2) Thrust washers
- (1) 54mm socket
Auto
Hubs to Aisin
Manual Hubs Conversion Kit Option 2 - $45 + $15 S/H
Used to convert your 1986-1995 4Runner/Pick Up from automatic locking
hubs (which do not stay locked in reverse) to manual locking hubs.
Included in kit:
- (2) 54mm lock nuts
- (2) Lock washers
- (2) 54mm adjusting nuts
- (2) Thrust washers
- (1) 54mm socket
- (2) Cover gaskets - star
- (2) Hub gaskets
Auto
Hubs to Aisin
Manual Hubs Conversion Kit with Wheel Bearings - $105 + $20 S/H
Used to convert your 1986-1995 4Runner/Pick Up from automatic locking
hubs (which do not stay locked in reverse) to manual locking hubs.
Included in kit:
- (2) 54mm lock nuts
- (2) Lock washers
- (2) 54mm adjusting nuts
- (2) Thrust washers
- (1) 54mm socket
- (2) Inner wheel bearings
- (2) Outer wheel bearings
- (2) Cover gaskets - star shaped
- (2) Hub gaskets
ADD Hubs to Aisin Manual
Hubs Conversion Kit - $15 + $5 S/H
Used to convert your 1986-1995 4Runner/Pick Up from ADD hubs to manual
locking hubs.
Included in kit:
- (2) Cover gaskets - star shaped
- (2) Hub gaskets
* If you have a 96+ 4Runner
or a 95.5+ Pick Up (Tacoma) you will need a manual hub conversion kit that
is totally different than what we offer as it requires a lot more parts
and costs significantly more ($1000 or more).
Wheel
Bearing Nut Kit - $8.50 + $5 S/H
Kit contains 2 nuts, star washer and flat index washer.
Star Gasket - $3 each + $1
S/H
(1) required per Aisin manual hub - same gasket for IFS and SFA
Hub Gasket - $5 each + $1 S/H
(1) required per Aisin manual hub - same gasket for IFS and SFA
54mm
Spindle Socket - $14 + $10 S/H
Our 54mm sockets are designed for servicing Toyota front axle wheel
bearings. We know you don't carry a 3/4" drive ratchet in your tool bag so
we made these sockets fit right on your 3/8" ratchet with no additional
adaptors needed.
Wheel
Bearing Kit - $39 + $10 S/H
Wheel Bearing kit includes inner and outer bearings, hub gaskets, inner
wheel bearing seal and star lock washer. One kit services left or
right side.
Hub
Outer Dial O-Ring (PAIR) - $10.00 + $1.00 S/H
There is a small rubber O-ring located between the inner and outer hub
dials. If this ring becomes damaged water and dust can leak into the hubs.
It can also make turning the dial difficult. Easy to install using
snap ring pliers and a 10mm socket. These are sold as a pair.
Hub Dial
Spring and Ball Bearing Set - $10.00 + $1.00 S/H
The number one problem we see here at WabFab Off-Road with Aisin manual
hubs is that somewhere along the life of the manual hub the dial spring
and ball bearing have been lost making the hub almost useless in staying
in the "FREE" or "LOCK" position. We now have the solution.
Replacement springs and ball bearings.
Included in each set:
-
(2) ball bearings
-
(2) springs
|